Roadware 10 Minute Concrete Mender

Now you can repair cracks and spalls to a smooth finish in a fraction of the time it takes with ordinary products. Roadware 10 Minute Concrete Mender is a revolutionary new two-part hybrid urethane for repairing concrete. It’s nearly water thin for deep penetration and it won’t pop out like epoxy because it never gets brittle.

► Product Literature


Product Inquiry
SKU: Roadware 10 Minute Concrete Mender Category:


Roadware 10 Minute Concrete Mender

ROADWARE 10 MINUTE CONCRETE MENDER™ is a two-part polyurethane that penetrates deep into concrete to make pernament repairs. Nearly thin as water at less than 8cps, Concrete Mender™ actually injects itself into the matrix of the concrete and shores up the existing concrete as well as making the repair. Concrete Mender™ eliminates the bondline as it Microdowels into the concrete. We call it Microdowling™.

Permanent repair in 10 minutes. In just minutes after application, Concrete Mender™ cures to a tough 4500psi polymer concrete that transfers heavy loads throughout the repair area. No more pop outs!

Cures in just 10 minutes at 70°F (21°C) • Works in freezers below -20°F (-28°C) • May be polished • Never gets brittle • Easily applied • Contains no epoxy or polyurea • Easy to mix • Nonflammable • Low V.O.C’s • Paintable • Coatable • Sandable • Meets USDA guidelines • And more…

Self-mixing at point of application.
Use a standard 1:1 ratio 600ml cattridge application gun.

Needle tip mixes are available.
For precise application. Choose from 14, 15 or 18 guage.

Bulk mix application for larger cracks and spalls.
Available in one gallon containers, two-gallon kits. Simply add sand and mix by hand. Also avaliable in ten-gallon kits.

Extend with sand.
One gallon of Concrete Mender™ makes about 2.2 gallons of repair material when combined with 2 parts silica sand. 2X the yeild of epoxy or polyurea. See our Product Estimator.

Freezer Floors
Repair concrete at working freezer temperatures below -20°F (-28°C).

Grind, polish and coat. Accepts polishing or most coating systems in about 10 minutes at 70°F (21°C)