Outdoor Forklifts for Rough Terrain
Improve productivity with high powered, low profile heavy duty forklifts with antispin. Choice of diesel, gas and gasoline engines.

Standard equipment

• Dieselmax 444, 4-cylinder, 84 hp engine, EPA-compliant low noise, low emission
• Sideshift
  
• Full instrumentation & indicators
  
• Fully adjustable suspension seat
  
• Tilt steering column
  
• Load sense power steering
  
• Halogen lighting package includes adjustable headlights & backup lights
  
• Safety lighting includes LED brake lights & amber warning light
  
• Retractable seatbelt
  
• FOPS operator platform
  
• Neutral safety start
  
• Power assisted enclosed wet disc brakes
  
• Parking brake with ergonomically-designed handle
  
• Backup alarm
  
• Engine pre-cleaner
  
• Engine fuel/water separator
  

Optional equipment

• Fully enclosed cab with lockable doors, tinted glass, front wiper & washer & interior light
  
• Four wheel drive
  
• Fully automatic Powershift transmission
  
• Air-conditioning - factory-installed
  
• Load backrest
  
• Turn signals
  
• Poultry package with rotating carriage and special lighting package
  
• Variety of shaft, hook & fork positioning carriages available
  
• Wide variety of shaft, hook & pallet forks available

Lift capacity of 16,000 lbs.

S160 Series General Features

• 16,000 lb lift capacity at 24" load centre
• DieselMax 444, EPA-compliant Tier III, low emission, intercooled, turbocharged, 114 hp diesel engine
• 4-wheel drive
• 4-wheel steer
• 3-speed fully automatic powershift transmission
• Hi-visibility SEE-THRU mast assemblies

Need extra lift and power but still the control and handling of a smaller truck? The 16,000 lb lift capacity of the S160 is ideal for rough terrain worksites with heavy bundles or extended loads, such as lumber or auto salvage yards.The four-wheel drive four-wheel steer, four equal-sized tires S160 with the turbocharged DieselMax 444 engine provides tremendous maneuverability and control on uneven terrain. Five degree frame levelling provides additional stability and ease of load placement on uneven ground.The comfortable, fully-isolated, rubber-mounted operator's compartment (which meets or exceeds the ANSI B56.6 standard) provides easy-to-see instrumentation and ergonomically-designed controls for increased operator efficiency and safety. Get the job done right with a Sellick S160.

S160 standard equipment

• Trunnion-mounted planetary axles with internal hydraulic disc brakes and integral steer cylinders
• Frame levelling (5 degrees left/right)
• Large tank capacity (35 gallons/133 L)
• Integral fail to safety park brake
• Dual element air filter
• Fuel/water separator with hand primer
• maintenance-free precleaner
• Vertical exhaust
• Full instrumentation & indicators, including water in fuel and air filter restriction
• Fully adjustable suspension seat with retractable seatbelt
• Load sense power steering
• Halogen lighting package includes adjustable worklights
• Safety lighting includes LED brake lights & amber warning light
• Tilt steering column with shifter assembly and full instrumentation, including hour meter
• FOPS-rated operator platform

S160 optional equipment

• Sideshift
• Hydraulic fork positioning
• Fully enclosed cab with lockable doors, tinted safety glass, front wiper & washer & interior light, fan defrost and sliding windows
• Turn signals
• Block heater
• AM/FM MP3 player
• Air conditioning
• Outside rear-view mirrors

Rough terrain tow forklift
Capacity of 13,000 lbs @ 12" load centre

The Sellick tow forklift was designed to lift and tow heavy or extremely large loads efficiently and safely in rough terrain environments. The STT80, with a lift capacity of 13,000 lbs, is ideally suited for the modular homes industry.

The STT80 tow forklift features the same tough one-piece frame and heavy-duty and reliable components as our S Series forklift--a DieselMax 444 low noise, low emission, diesel engine coupled to a four-speed fully automatic transmission and high load capacity drive and steer axles. The two-wheel drive truck is also available with a robust optional four-wheel drive axle. The STT80 boasts an ergonomically-designed FOPS-rated operator's platform fully adjustable suspension seat, easily-viewable instrumentation and gauges and tilt steering column with shifter.

The STT80 - Unique Rough Terrain Forklift, lift capacity of 13,000 lbs. @ 12" load centre

STT80 General Features

• 13,000 lb lift capacity at 12 inch load centre
• DieselMax 444, EPA-compliant Tier III, low emission, 4 cylinder, direct injection diesel engine
• 4-speed fully automatic transmission
• Slider-type mast, no bearing mast design with mounted 2 5/16" inch ball hitch for easy engagement
• Lift and sideshift controls for efficient engagement

STT80 standard equipment

• Slider-type mast, no bearing mast design with mounted 2 5/16" ball hitch
  
• Lift and sidshift functions
  
• Dual element air filter
  
• Fuel/water separator with hand primer
  
• Cold weather starting aid
  
• Tilt steering column with shifter assembly and full instrumentation
  
• Full instrumentation & indicators, including water in fuel and air filter restriction
  
• Fully adjustable suspension seatwith retractable seatbelt
  
• Load sense power steering with hydraulic pump assistance
  
• Cupholder, latched operator's manual compartment
  
• Turn signals
  
• Fully isolated, rubber-mounted operator's compartment meets or exceeds ANSI B56.6 FOPS standard
  

STT80 optional equipment

• 4WD
  
• Block heater
  
• AM/FM MP3 player
  
• Outside rear-view mirrors
  
• Ultraseal tire sealant
  

• 5,000, 6,000 or 8,000 lb lifting capacity at 24" load centre
• Hi-visibility See-Thru mast of heights up to 30 ft,
  2-stage and 3-stage full free lift
• 2-wheel or optional 4-wheel drive
• 4-speed, full synchromesh transmission
• Compact dimensions and low profile design for operation in close quarters

• Dieselmax 444, 4-cylinder, 84 hp engine, EPA-compliant low noise, low emission
• Torque proportioning differential
• Parking brake safety interlock
• Power reversing full synchromesh torque converter ITL transmission
• ITL PD70 drive axle with Max-trac four-pinion differential and ITL steer axle
• Wet disc brakes
• Complete lighting kit includes two headlights, two tail lights and one rear work light
• Easy-to-read instrument cluster includes transmission and engine oil and temperature warning lights
• Gauges include engine oil pressure, fuel level, voltmeter, coolant temperature and hour meter
• Grammer seat
• Three-section hydraulic valve
• Overhead guard
• Brake lights
• Sideshifting, 2-stage or 3-stage See-Thru mast
• Hydrostatic steering
• Neutral safety start
• Tool box
• Electric horn
• Parking brake

Lift capacities @ 48 inch load centres

Poultry Coop Handlers General Features

• Hi-visibility See-Thru mast of heights up to 30 ft, 2-stage and 3-stage full free lift
• 2-wheel or optional 4-wheel drive
• 4-speed full synchromesh transmission or optional fully automatic Powershift transmission

• Dieselmax 444, 4-cylinder, 84 hp engine, EPA-compliant low noise, low emission
• Torque proportioning differential
• Power reversing full synchromesh torque converter ITL transmission
• ITL PD70 drive axle with Max-trac four-pinion differential and ITL steer axle
• Poultry lighting and cooling system
• 15 degrees or 43 degrees slope piling carriages
• Electric horn
• Easy-to-read instrument cluster includes transmission and engine oil and temperature warning lights
• Overhead guard
• Brake lights
• Sideshifting See-Thru mast
• Hydrostatic steering
• Neutral safety start
• Parking brake

The STM Series - Truck Mounted Rough Terrain Forklift, 5,000 to 7,000 lb capacities with
offset operator position and different profiles

Models
STM55 - Standard 5,500 lb. capacity @ 24" load centre
STM55P - Pantograph Mast 5,500 lb. capacity @ 24" load centre
STM55LP - Low Profile 5,500 lb. capacity @ 24" load centre (poultry)
STM70 - Standard 7,000 lb. capacity @ 24" load centre

• Kubota V2203M naturally aspirated low noise, low emission, diesel engine
• Water separator
• Precleaner
• Single-element air filter
• Cold weather starting aid (glow plug)
• Fuelcapacity: 9 gallons (34 L)

TRANSMISSION

• Hydrostatic transmission\
• Full-time 3-wheel drive
• Inching control for precise load placement

OPERATOR COMPARTMENT

• Side-mount operator station provides increased visibility over loads of all sizes
• Operator's compartment meets or exceeds ANSI B56.6 FOPS/ROPS standard
• Adjustable driver's seat with retractable seatbelt
• Automotive-style controls
• Latched operator's manual compartment

INSTRUMENTS

• All-in-one dashboard instrument cluster includes hour meter/fuel gauge. Indicator lights include: Hydraulic oil temperature, air filter restriction
• Horn
• Backup alarm
• Traction control switch (improves performance on rough terrain)
• Neutral safety start

• 5-spool hydraulic valve with easy-to-reach controls
• Stabilizers

STEERING

• Priority load sense steering

MAST ASSEMBLIES

• Corrosion resistant chain
• Lift heights to 8 ft, 10 ft and 12 ft

CARRIAGES

• 48" ITA hook Class III

ELECTRICAL

• Sealed fuse box
• Two front and one rear adjustable halogen worklights
• Safety lighting includes LED brake lights & brake lights

OPTIONAL EQUIPMENT

• Tilt steering column
• Suspension seat
• Beacon light - strobe
• Tire - 10 -16.5 10 ply

MOUNTS

• Universal easy-to-install mounts fit most truck/trailers