The DT80 is equipped with a reliable John Deere or Cummins diesel engine.
-
Road-building and road repair
-
General construction clean-up
-
Airport operations
-
Quarry and landfill site operations
-
Rear leaf spring suspension
-
Solid-state touch pad control panel for all broom functions
-
Easy-open engine access panels on left and right side rear
-
Hydraulic system with load-compensated piston (for longer life)
-
Low noise level in the cab (enclosed cabin option)
-
Heavy-duty 12 guage (2.4mm thick) steel construction
-
Eaton hydrostatic drive
-
Large-capacity dual element air-cleaner and pre-cleaner
- Enclosed cab with air-conditioning and/or heater
- 170 gallon (640 liter) capacity water spray system
- Tilt and telescoping steering column
- 90" (228 cm) wide scaper blade
- Curb and gutter brush
- Tow bar
- Special ligthing packages
Operators have clear
viewing in all directions
for safe operation.
170 gallon (640 liter) polyethylene rust proof tank with a 3 gpm high efficiency electric pump, galvanized spray bar and 8 spray nozzles, strainer filter and back flow valve with electronic control switch at operators station.
John Deere diesel - Model 4045DF
276 cubic inches (4.5 liter) 80 HP
at 2500 RPM w/ 95 amp alternator
Cummins diesel - Model 4B3.9
239 cubic inch (3.92 liter) 80 HP
at 2500 RPM w/ 95 amp alternator
Dimensions
Weight - 5,300 lbs. (2400 kg)
standard unit (w/ canopy)
Height - 107 inches (271 cm) (w/canopy)
Length - 172 inches (437 cm)
Width - 100 inches (254 cm) (transport)
Wheelbase - 133 inches (338 cm)
Turning Radius - 13 feet (396 cm) (inside)
Chassis
Welded 6" channel w/ gussets
at all stress points.
Certified roll over protection (ROPS)
structure meets and exceeds all
Federal Standards.
Steering
Orbital hydraulic power steering.
Hydraulic Tank
23 Gallon capacity
with 10 micron return filter
Fuel Tank
23 Gallon capacity.
Heavy duty vertically mounted radiator
and oil cooler with 8,000 cfm suction fan.
Front Axle
Heavy-duty truck type (oscillating)
Rear Axle
Heavy-duty semi-float differential with
spring supsension system.
Wheels
Four - 6 bolt (15" x 6") steel spoke.
Tires
Four radial P235/75R15 load range B.
Brakes
Four wheel hydraulic with dual master
cylinder and mechanical parking brake.
Transmission
Infinitely variable hydrostatic pump and
motor driving a differential rear axle
through a 2-speed gearbox.
low range: 0-12 mph (0-19 kph)
high range: 0-34 mph (0-55 kph)
Hudraulic System
Load compensated pump
- 28 GPM w/ 3,000 PSI operating pressure.
10 micron high pressure suction filter.
85 Revere Drive, Suite D, Northbrook, IL 60062 USA
Tel: 847-412-0200 - Fax: 847-412-0034 - email: powerequipment@jdhintl.com
8 foot all welded tubular construction.
Direct drive motor enclosed in core (200 RPM).
Sweeping width: 96 inches
10" x 32" Prostran wafer type brush filler.
Sweeping Angle
45 degrees (left and/or right).
Circle swing frame mounted on
10 heavy-duty sealed, tapered bearings with debris guards.
Brush Cover
12 gauge steel, 140 degree full brush length with end plate covers and full length rock deflector.
Broom Controls
Touch panel with solid state microprocessor
circuit board, environmentally sealed Lexan cover, control broom swing, broom on - off, variable brush speed, broom lift, float and adjustable down pressure.
Controls and Accessories
Padded seat with arm rests and seat belts, dual element air cleaner & precleaner, 12 volt ignition system, 800 cca battery and back-up alarm.
Gauges include tachometer, hour meter, water temp, oil pressure, fuel and volt meter
|
|